ItirubTransmitter ADC – Wifi
This device can perform measurement on analog sensors of type 4~20, 0~10 and transmit the collected data through WIFI communication with MQTT.
ItirubTransmitter
It is a versatile device, composed of hardware and software, created to work without interruptions, to serve remote areas and environments of difficult access, simplifying the measurement of sensors, and data transmission through “Wifi” connections with MQTT protocol.
Measurement
Featuring multiple inputs for sensors, analog 4~20mA, 0~10v and RS485 with treatment The acquired data can be displayed on panels, and it is compatible with the main cloud monitoring systems on the market.
Energy consumption
Equipment with low energy consumption, can be powered by internal battery, recharge can be
performed through small solar panels or (source) DC connected to the device.
Care and Precautions
The ItirubTransmitter is intended for professional use, and must be handled by trained professionals, qualified in the installation, configuration and operation, only use power supplies following the specifications contained in the manual, to power the ItirubTransmitter
Datasheet
| Communication Interface | |||
| Description | ItirubTransmitter ADC - Wifi | ||
| Pattern | Wifi 2.4 IEEE® 802.11 b/g/n | ||
| Baud Rate | 11Mbit | ||
| Sercuity | |||
| Mode Communication | Client | ||
| Conexion | SMA or indoor antenna | ||
| Protocol | MQTT TCP/IP | ||
| unique identifier | Mac Address | ||
| Sensorial Interface | |||
| Description | Analog | ||
|
Channels |
4x4~20 mA 4x0~10v 2x4~20 mA e 2x0~10V |
||
| Loop Power | 24V Max 50mA | ||
| Conexion | Terminal plug 18P removable | ||
| Measuring range | 4 a 20mA 0 a 10V |
||
| Precision | 0.02 | ||
| Conexion RS485 | 1xRS485 | ||
| Electrical and Signaling | |||
| Leds status | Power, Battery, Ethernet, Wifi, LoRa e RS485 | ||
| Power Supply | 5 a 10Vdc | ||
| Solar Panel | VOC 6, 500mA *Optional* | ||
| Internal Battery | Li-lon 3.6Vlts *Optional* | ||
| Temperature Internal | Sensor for measuring the internal temperature of the ItirubTransmitter | ||
| Level Battery | |||
| Programming Connector | SWD programming connector with 10-pin 1.27mm interface | ||
| Settings | Micro USB connection for file storage and Firmware configuration. | ||
Included Items
| 01 ItirubTransmitter ADC - Wifi |
| 01 Cabe USB |
| 01 Font 5V |
| 01 Terminal plug removable |
| 01 Fixing Clamp |
